Savin SP 3200SF ADF Roller Replacement G960-1179, G9601179, B273-9530, B2739530
Savin SP 3200SF ADF Roller Replacement Procedure G960-1179, G9601179, B273-9530, B2739530
Down the page, you’ll find the Savin SP 3200SF ADF Roller Replacement Remedy. Since we move more and more when it comes to scanning information, I’ve recognized and incline in the level of paper documents being fed by way of document feeders. Completely different makes set in place differing maintenance numbers for the roller and separation pad. I’d believe that in case the roller is between 50,000 and 75,000 it very likely needs to be swapped out in addition the separation pad rubber is rated between 25,000 and 50,000. On the next paragraphs, you will look at the illustrated replacement advice.
Savin SP 3200SF ADF Roller Replacement tips
Symptoms of worn rollers are ineffective grab. Most users say that they must more or less urge the material along initially to get it started feeding within the equipment and intermittent jamming results on a regular basis. Indicators of a old pad tend to be multiple feeding or some like to call it, double feeding. If you see warning signs of either one of these troubles the best option is to switch out these components. Typically if your experiencing difficulity feeding, washing the rollers off a bit should get it back performing once more for a bit of time till you can get the equipment found. Multiple feeding is commonly more serious and is hard to get it doing the job in the correct way till the separation pad is changed out.
Savin SP 3200SF Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)
Savin SP 3200SF ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Savin SP 3200SF ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Savin SP 3200SF ADF Roller Replacement and Separation Pad Replacement Parts
Savin SP 3200SF Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95 Genuine G960-1179 Doc Feeder (ADF) Pickup / Feed Roller Assembly for Savin SP 3200SF; Doc Feeder Part – Genuine Samsung Part; Savin G960-1179 / G9601179 / B273-9530 / B2739530 |
 Savin SP 3200SF Doc Feeder Separation Pad Only (Genuine) – $6.95 Genuine G960-1222 Doc Feeder Separation Pad Only for Savin SP 3200SF; Doc Feeder Part – Genuine Samsung Part – Also Works in the MP Tray Assembly Only in the Samsung SCX6345N, Xerox WorkCentre 4150S; Savin G960-1222 / G9601222 |
