Samsung SCX-4720FN ADF Roller Replacement Procedure JC97-01962A, JC97-01962C, B2739530
Directly below, there’s the Samsung SCX-4720FN ADF Roller Replacement Remedy. Because we move more and more towards scanning data, I’ve discovered and incline with the number of paperwork being fed with document feeders. Many companies specify unique maintenance numbers for the roller and separation pad. I’d assert whenever the roller is between 50,000 and 75,000 it potentially should really be replaced and the separation pad rubber is rated around 25,000 and 50,000. In this article, you will get the illustrated replacement information.
Indications of old rollers are disappointing pick up. Many individuals say that they have to kind of push the pages along at the beginning to get it started feeding inside the machine and occasional jamming will take place on an ongoing basis. Symptoms of a old pad tend to be multiple feeding or some like to call it, double feeding. When you see indication of either one of the aforementioned issues your best bet is to switch out these parts. Most of the time if your having difficulty feeding, washing the rollers off a small amount should get it back functioning again for a bit of time until you can get the materials acquired. Multiple feeding is actually more frustrating and is challenging to get it operating in the correct way prior to the separation pad is replaced.
Samsung SCX-4720FN ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Samsung SCX-4720FN ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Samsung SCX-4720FN ADF Roller Replacement and Separation Pad Replacement Parts
Samsung JC97-01962A Mea Unit-Pickup Dell
Features
- This is an O.E.M. Authorized part
- Fits with various Samsung brand models
- Oem part # JC97-01962A
Price: $434.98
47 used & new available from $271.82
Price: $479.99
21 used & new available from $300.00
Price: $529.99
13 used & new available from $474.99
Price: $737.78
10 used & new available from $699.99