Samsung CLX-3160FN ADF Roller Replacement JC97-01962A, JC97-01962C, B2739530
Samsung CLX-3160FN ADF Roller Replacement Procedure JC97-01962A, JC97-01962C, B2739530
Underneath, there is the Samsung CLX-3160FN ADF Roller Replacement Strategy. While we move more and more in direction of scanning items, I’ve noticed and incline in the levels of paper being fed through the use of document feeders. Different producers set diverse maintenance numbers relating to the roller and separation pad. I’d believe that whenever the roller is between 50,000 and 75,000 it most probably ought to be repaired additionally, the separation pad rubber is rated between 25,000 and 50,000. Underneath, you will get the illustrated replacement advice.
Samsung CLX-3160FN ADF Roller Replacement
Signs of worn out rollers are bad grab. Most people complain that they need to kind of push the paper documents along at the beginning to get it started feeding inside the device and sporadic jamming develops on a regular basis. Indications of a worn pad are generally numerous feeding or some like to call it, double feeding. If you find signs of either one of such problems your best bet is to remove and replace these parts. In most cases when your experiencing difficulity feeding, washing the rollers off a little should get it back working again for a short amount of time till you can get the materials bought. Multiple feeding is often times worse and is difficult to get it doing the job properly till the separation pad is exchanged.
Samsung CLX-3160FN ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Samsung CLX-3160FN ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Samsung CLX-3160FN ADF Roller Replacment and Separation Pad Replacement Parts
Samsung JC97-01962A Mea Unit-Pickup Dell
Features
- This is an O.E.M. Authorized part
- Fits with various Samsung brand models
- Oem part # JC97-01962A
