Ricoh AC205L ADF Roller Replacement B273-9530, B2739530, G960-1179, G9601179
Ricoh AC205L ADF Roller Replacement Procedure B273-9530, B2739530, G960-1179, G9601179
Just below, you will find the Ricoh AC205L ADF Roller Replacement Technique. As we move more and more in direction of scanning files, I’ve witnessed and incline with the quantity of pages being fed from document feeders. A number of brands allocate diverse maintenance rates relating to the roller and separation pad. I’d believe that whenever the roller is between 50,000 and 75,000 it usually needs to be replaced and the separation pad rubber is rated between 25,000 and 50,000. In this article, you will get the illustrated replacement details.
Ricoh AC205L ADF Roller Replacement
Signs and symptoms of old rollers are lousy pick up. The majority of folks make a complaint that they must more or less urge the documents along at the start to get it started feeding into the component and occasional jamming occurs on a regular basis. Signs of a worn out pad have proven to be numerous feeding or some like to call it, double feeding. When you see signs and symptoms of either of the aforementioned troubles the best option is to remove and replace these parts. Usually if your having issues feeding, cleaning the rollers off a small amount ought to get it back doing the job once more for a bit of time till you can get the equipment bought. Multiple feeding is usually more annoying and is challenging to get it functioning efficiently till the separation pad is exchanged.
ricoh AC205L Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)
Ricoh AC205L ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Ricoh AC205L ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Ricoh AC205L ADF Roller Replacement and Separation Pad Replacement Parts
