Dell 1600n ADF Roller Replacement Instructions M5512

 

Dell 1600n ADF Roller Replacement Procedure M5512

In the next paragraphs, you will find the Dell 1600n ADF Roller Replacement Procedure. As we move more and more when it comes to scanning data, I’ve seen and incline in the level of documents being fed through the use of document feeders. A number of products specify differing maintenance numbers for the roller and separation pad. I’d think if the roller is between 50,000 and 75,000 it more than likely ought to be changed additionally, the separation pad rubber is rated between 25,000 and 50,000. In the next paragraphs, you will look at the illustrated replacement directions.

Dell 1600n ADF Roller Replacement tips

Signs and symptoms of old rollers are ineffective pick up. Nearly all people complain that they must more or less urge the papers along in the beginning to get it started feeding inside the machine and sporadic jamming exists on an ongoing basis. Signs of a old pad are typically multiple feeding or some like to call it, double feeding. When you notice signs and symptoms of either one of these kinds of difficulties the best option is to switch out these components. In most instances when your having troubles feeding, cleansing the rollers off a little bit should get it back performing once again for a bit of time till you can get the equipment ordered. Multiple feeding is actually more annoying and is challenging to get it performing adequately till the separation pad is changed.


Dell 1600n Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)

Dell 1600n ADF Roller Replacement Procedure

1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..

Dell 1600n ADF Roller Replacement

Dell 1600n ADF Separation Replacement Procedure

1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.

Dell 1600n Separation Replacement

There you have it. This job is pretty easy and has minimal cost.

Click on the link below to order in your Dell 1600n ADF Roller Replacement and Separation Pad Replacement Parts


Dell 1600n Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95

Genuine M5512 Doc Feeder (ADF) Pickup / Feed Roller Assembly for Dell 1600n; Doc Feeder Part – Genuine Samsung Part

Dell 1600n Doc Feeder Separation Pad Only (Genuine) – $6.95

Genuine 4M346 Doc Feeder Separation Pad Only for Dell 1600n; Doc Feeder Part – Genuine Samsung Part – Also Works in the MP Tray Assembly Only in the Samsung SCX6345N, Xerox WorkCentre 4150S


We will be happy to hear your thoughts

Leave a reply

Shopping cart