Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140 Call for Service
Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C8140 Call for Service
Description :
Main tray problem (optional 3000- sheet document finisher) The main tray is not detected by the main tray upper limit detection sensor or the main tray paper upper surface detec- tion sensor within 20s since the tray has started ascending. The main tray upper limit detection sen- sor or the main tray paper upper surface detection sensor is not detected to be turned off in 20 s after the main tray has descended. The main tray low limit detection sensor is not detected to be turned on in 20 s after the main tray has descended. During main tray ascent, the main tray upper limit detection sensor or the main tray paper upper surface detection sen- sor stays on for more than 2 s.
Causes :
1. Poor contact in the connector termi- nals.
2. Defective main tray motor.
3. Defective main tray upper limit detec- tion sensor/main tray paper upper surface detection sensor/main tray lower limit detec- tion sensor.
4. Defective finisher main PWB.
5.
6.
Solutions :
1. Check the connection of connector YC6 on the finisher main PWB and the connector on the main tray motor, and the continuity across the connector terminals. Repair or replace if necessary.
2. Replace the main tray motor.
3. Replace the sensor.
4. Replace the finisher main PWB and check for correct operation.
5.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C8140 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
