Kyocera KM-C2525E, C3225E, C3232E, C4035E C3100 Call for Service
Kyocera KM-C2525E, C3225E, C3232E, C4035E C3100 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C3100 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C3100 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C3100 Call for Service
Description :
Scanner carriage problem The home position is not correct when the power is turned on or at the start of copying using the table.
Causes :
1. Defective scanner PWB.
2. Defective scanner home position switch.
3. Defective scanner motor.
4. Poor contact in the connector termi- nals.
5. The mirror frame, exposure lamp, or scanner wire is defective.
6.
Solutions :
1. Replace the scanner PWB and check for correct operation.
2. Replace the scanner home position switch.
3. Replace the scanner motor.
4. Check the connection of connector YC4 on the scanner PWB and the connector on the scanner home position switch, and the con- nection of connector YC9 on the scanner PWB and the connector on the scanner motor and the continuity across the connec- tor terminals. Repair or replace if necessary.
5. Check if the mirror flames and exposure lamp are on the rail. And check the scanner wire winds correctly.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C3100 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
