Kyocera KM-C2525E, C3225E, C3232E, C4035E C1120 Call for Service
Kyocera KM-C2525E, C3225E, C3232E, C4035E C1120 Call for Service Instructions
Below you will find the service manual information for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C1120 Call for Service along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera KM-C2525E, C3225E, C3232E, C4035E C1120 Call for Service
Kyocera KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E C1120 Call for Service
Description :
Paper feeder left lift position problem (optional 3000-sheet paper feeder) Paper feeder switch 1 does not turn on within 30 s of paper feeder lift motor 2 turning on.
Causes :
1. Poor contact in the connector termi- nals.
2. Defective paper feeder lift switch 1.
3. Defective paper feeder lift motor 2.
4. The paper feeder left lift does not rise properly.
5.
6.
Solutions :
1. Check the connection of connector on the engine PWB and the connector on the paper feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary.
2. Check if YC5-4 on the paper feeder main PWB goes low when paper feeder lift switch 1 is turned off. If not, replace paper feeder lift switch 1.
3. Check for continuity across the coil. If none, replace paper feeder lift motor 2.
4. Check the gears and belts, and remedy if necessary.
5.
5.
Remember, not every error is exactly the same. What fixes the Kyocera KM-C2525E, C3225E, C3232E, C4035E C1120 Call for Service one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
