Canon imageRUNNER 1750, 1740, 1730 Error Code E110 0003

 

Canon imageRUNNER 1750, 1740, 1730 Error Code E110 0003 Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750, 1740, 1730 Error Code E110 0003 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750, 1740, 1730 Error Code E110 0003

Service Manual Instructions for the Canon imageRUNNER 1750, 1740, 1730 Error Code E110 0003

E110 0003 Laser Scanner Motor error
Description :
Description The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passed. *When the same status was detected again after executing an error retry.

Causes :
Laser Scanner Motor error

Solutions :
Remedy

1. Check the Laser Scanner Unit connector.

2. Replace the Laser Scanner Unit.

3. Replace the DC Controller PCB (PCB1).

Remember, not every error is exactly the same. What fixes the Canon imageRUNNER 1750, 1740, 1730 Error Code E110 0003 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart