Canon imageRUNNER 1750, 1740, 1730 Error Code E010 0002

 

Canon imageRUNNER 1750, 1740, 1730 Error Code E010 0002 Instructions

Below you will find the service manual information for the Canon imageRUNNER 1750, 1740, 1730 Error Code E010 0002 along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1750, 1740, 1730 Error Code E010 0002

Service Manual Instructions for the Canon imageRUNNER 1750, 1740, 1730 Error Code E010 0002

E010 0002 Main Motor (M2) rotation error

Description :
Description Detection was performed every 100msec during the drive (after the lock detection) and the lock signal was not detected 5 times in a row (in 500 msec).

Causes :
Main Motor (M2) rotation error

Solutions :
Remedy

1. Check the connector between the Main Motor and the DC Controller PCB (J203).

2. Replace the Main Motor (M2).

3. Replace the DC Controller PCB (PCB1).

Remember, not every error is exactly the same. What fixes the Canon imageRUNNER 1750, 1740, 1730 Error Code E010 0002 one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart