Kyocera FS1030MFP, FS1035MFP Call Service C6400 Error Code Instructions
Below you will find the service manual information for the Kyocera FS1030MFP, FS1035MFP Call Service C6400 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera FS1030MFP, FS1035MFP Call Service C6400 Error Code
6400 Zero cross signal error
Description :
The zero cross signal does not reach the control PWB for specified time.
Causes :
Defective harness between high voltage PWB (YC202) and control PWB (YC23), or improper connector insertion.
Defective connection between power source PWB (YC103) and high voltage PWB (YC201).
Defective power source PWB.
Defective control PWB.
Solutions :
Reinsert the connectors.
Also check for continuity within the connector harness.
If none, remedy or replace the harness.
Replace the power source PWB
Replace the control PWB
Remember, not every error is exactly the same. What fixes the Kyocera FS1030MFP, FS1035MFP Call Service C6400 Error Code one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
