Kyocera FS1370DN 6030 Error Code Troubleshooting Information

 

Kyocera FS1370DN 6030 Error Code Troubleshooting Information Instructions

Below you will find the service manual information for the Kyocera FS1370DN 6030 Error Code Troubleshooting Information along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 
Kyocera FS1370DN 6030 Error Code

Service Manual Instructions for the Kyocera FS1370DN 6030 Error Code Troubleshooting Information

6030 Broken fuser thermistor wire
Description :
Input from fuser thermistor is 0 (A/D value).
Causes :
Broken fuser thermistor wire.

Fuser thermistor installed incorrectly.

Fuser thermal cutout triggered.

Fuser heater lamp installed incorrectly.

Broken fuser heater lamp wire.

Solutions :
Poor contact in the fuser thermistor connector terminals.

Reinsert the connector

Replace the fuser unit

Additional information for the Kyocera FS1370DN 6030 Error Code

Majority of the time, like 99% of the time, the fuser will end up needing to be replaced if turning the machine off and back on doesn’t work. On some of the newer machines the thermal fuses can be reset with a shot of extremely cold air. This is usually accomplished by turning a can of air upside down and giving it a quit blast. Then check for continuity. Actually, given the service manual tips your best bet, if you were going to get serious about finding the issue, is to check for continuity through the AC part of the circuit. The lamp and thermal fuses are AC. Thermistors are DC.
Click on the link below for the Replacement instructions

Kyocera Laser FS1370DN Fuser Replacement Instructions

Remember, not every error is exactly the same. What fixes the Kyocera FS1370DN 6030 Error Code Troubleshooting Information one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

302LZ93050 FK-170

302LZ93050 FK-170(U) NEW OEM

 out of stock
Amazon.com
as of March 12, 2024 10:00 pm

Features

  • Genuine Brand Name OEM
  • 100% Guaranteed

Product Description

302LZ93050 FK-170(U) NEW OEM

We will be happy to hear your thoughts

Leave a reply

Shopping cart