Kyocera FS1370DN 6000 Error Code Troubleshooting Information

 

Kyocera FS1370DN 6000 Error Code Troubleshooting Information Instructions

Below you will find the service manual information for the Kyocera FS1370DN 6000 Error Code Troubleshooting Information along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 
Kyocera FS1370DN 6000 Error Code

Service Manual Instructions for the Kyocera FS1370DN 6000 Error Code Troubleshooting Information

6000 Broken fuser heater lamp wire
Description :
The fuser temperature does not rise after the fuser heater lamp has been turned on.
Causes :
Fuser thermistor installed incorrectly.

Fuser thermal cutout triggered.

Fuser heater lamp installed incorrectly.

Broken fuser heater lamp wire.
Solutions :
Poor contact in the fuser thermistor connector terminals.

Reinsert the connector

Poor contact in the fuser heater lamp connector terminals.

Replace the fuser unit

The main thing is to check for continuity across the AC circuit. Fuser lamp and thermal fuses located on the top of the fuser. On most modern machines the thermal fuses can be reset by a cold blast of air from a can of air held upside down and blasted briefly on the surface of the fuse. If done correctly the top of the thermal fuse should pop back out. Now most manufactures recommend replacing the fuser if this part blows open but sometimes it will get your machine back up and running. Due to the fact this part is a safety precaution I can only recommend to use this solution with care. Your best bet might to be replace the fusing unit.

Click on the link below for the Replacement instructions

Kyocera Laser FS1370DN Fuser Replacement Instructions

Remember, not every error is exactly the same. What fixes the Kyocera FS1370DN 6000 Error Code Troubleshooting Information one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.

If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.

302LZ93050 FK-170

302LZ93050 FK-170(U) NEW OEM

 out of stock
Amazon.com
as of March 19, 2024 2:23 am

Features

  • Genuine Brand Name OEM
  • 100% Guaranteed

Product Description

302LZ93050 FK-170(U) NEW OEM

We will be happy to hear your thoughts

Leave a reply

Shopping cart