Kyocera FS3040MFP and FS3140MFP C3100 Error Code
Kyocera FS3040MFP and FS3140MFP C3100 Error Code Instructions
Below you will find the service manual information for the Kyocera FS3040MFP and FS3140MFP C3100 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Kyocera FS3040MFP and FS3140MFP C3100 Error Code
3100 ISU home position error
Description :
The home position is not correct when the power is turned on or at the start of copying using the table.
Causes :
Defective connector cable or poor contact in the connector.
Defective home position sensor.
Defective ISU motor.
Defective CCD PWB.
Defective main PWB.
Solutions :
Reinsert the connector.
Also check for continuity within the connector cable. If none, remedy or replace the cable.
Home position sensor and CCD PWB (YC3) CCD PWB (YC2) and main PWB (YC8) ISU motor and main PWB (YC1004)
Replace the home position sensor.
Replace the ISU motor.
Replace the scanner unit
Replace the main PWB and check for correct operation
Remember, not every error is exactly the same. What fixes the Kyocera FS3040MFP and FS3140MFP C3100 Error Code one time might not solve it the next time. While the information above comes from the service manual and generally should get your machine up and running, sometimes other factors might be in play.
If you are reading this article and have experience with this error and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.
