Kyocera FS3040MFP and FS3140MFP C6000, C6020, C6030 Error Code
Kyocera FS3040MFP and FS3140MFP C6000, C6020, C6030 Error Code
On this page find you will find information on the Kyocera FS3040MFP and FS3140MFP C6000, C6020, C6030 Error Code. Sometimes these errors happened all at the same time. This page will help you troubleshoot this situation and hopefully get your machine back up and running. Also, you will find links to purchase a replacement fuser along with a link to the fuser replacement instructions at the bottom of the article.
Kyocera Fuser Kit FK-350
Features
- 302J193050 302J193051 302J193052 30
6000/6020/6030 Combined
Broken fuser heater wire / Abnormally high fuser thermistor temperature / Broken fuser thermistor wire
Deformed connector pin.
If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Defective triac.
Remove the power cord and check that the resistance between terminals T1 and T2 of the triac TRA51 is of several Mega-Ohms and not shorted. If failed, replace the power source PWB
99% of the time replacing the fusing unit will fix your fuser related errors. However, once in a great while the triac on the low voltage power supply goes out. Above is a brief description of how to go about troubleshooting the triac if you believe that is the problem.
Click on the link below for the fuser replacement instructions
Kyocera FS3040MFP, FS3140MFP, FS3540MFP Fuser Replacement
Trocando Fusor FK-350
Retirando e instalando Fusor Kyocera FS-4020/3040/3540.
