HP Laserjet Series M552, M553, M577 Fuser Replacement
Below you will find the illustrated instructions for the HP Laserjet Series M552, M553, M577 Fuser Replacement. These fusers are rather simple to replace. If you can replace the toner cartridge in your machine then you can tackle this job. In this article you will find the illustrated fuser replacement instructions along with a link to the fuser life reset procedure. Also, you will find links to order in a replacement fuser if you haven’t already.
HP B5L35-67902 Fusing assembly – For HP Laserjet Series M552, M553, M577
HP Laserjet Series M552, M553, M577 Fuser Replacement Procedure
CAUTION: The fuser is very hot. After turning the printer power off, allow the fuser to cool for at least 30 minutes before removing it.
1. Open the right door
2. Grasp the two fuser handles, and then squeeze the two blue triggers on the handles to release the fuser.
3. Release the fuser
4. Slide the fuser straight out of the printer to remove it.
5. Unpack the replacement assembly
6. Align the fuser with the opening in the printer.
7. Slide the fuser into the printer, push in to install it, and then make sure that it is fully seated.
TIP: When the fuser is fully seated, the two blue triggers on the handles make an audible click.
8. Close the right door.
9. Reset the fuser counter = Link Below
HP Laserjet Series M552, M553, M577 Fuser Life Reset