Kyocera FS2020D, FS3920DN, FS4020DN Feed Roller Replacement
Kyocera FS2020D, FS3920DN, FS4020DN Feed Roller Replacement
Below you will find the illustrated instructions for the Kyocera FS2020D, FS3920DN, FS4020DN Feed Roller Replacement along with the cassette tray separation roller. These parts tend to last between 50,000 and 100,000 prints depending on environment and paper conditions. Usually if I’m servicing a machine that falls in this range I replace these parts.
Kyocera FS2020D, FS3920DN, FS4020DN Feed Roller Replacement Procedure
1. Remove the cassette.
2. While pushing the lock and then slide the paper feed roller pin.
3. While pressing the lever and then remove the paper feed assembly.
4. Check or replace the paper feed assembly and refit all the removed parts.
Kyocera FS2020D, FS3920DN, FS4020DN Separation / Retard Roller Replacement Procedure
1. Remove the cassette.
2. Unhook two hooks and then remove the retard guide.
3. Remove the retard holder (roller) from the retard guide.
4. Check or replace the retard roller
NOTE:
When the periodic maintenance, perform maintenance mode :
U251 Clearing the maintenance count
