Kyocera FS3040MFP, FS3140MFP, FS3540MFP Feed Roller Replacement

 

Kyocera FS3040MFP, FS3140MFP, FS3540MFP Feed Roller Replacement

Below you will find the illustrated instructions for the Kyocera FS3040MFP, FS3140MFP, FS3540MFP Feed Roller Replacement and Separation Roller replacement. I tend to see problems with this type of feed roller between 50,000 to 100,000 prints. Usually, if I find the machine is in this range then it’s time for some new feed rollers. Below are links to order in some new feed  and separation rollers. Now if you find the machine has over 100,000 prints you might want to check for other print quality problems and inspect other common maintenance items like the drum and fuser. At the bottom of the article you will find a link to the entire maintenance kit if you decide that option is needed. Buying the parts all together will save lots of money over buying them individually.


Kyocera FS3040MFP, FS3140MFP, FS3540MFP Feed Roller Replacement Procedure
1. Remove the cassette.
2. While pushing the lock and then slide the paper feed roller pin.
3. While pressing the lever and then remove the paper feed assembly.
4. Check or replace the paper feed assembly and refit all the removed parts.

Kyocera FS3040MFP, FS3140MFP, FS3540MFP Feed Roller Replacement

 

Kyocera FS3040MFP, FS3140MFP, FS3540MFP Separation / Retard Roller Replacement Procedure

1. Remove the cassette.
2. Unhook two hooks and then remove the retard guide.

Kyocera FS3040MFP, FS3140MFP, FS3540MFP separation Roller Replacement
3. Remove the retard holder (roller) from the retard guide.
4. Check or replace the retard roller

Kyocera FS3040MFP, FS3140MFP, FS3540MFP separation Roller installation
NOTE:
When the periodic maintenance, perform maintenance mode :
U251 Clearing the maintenance count

We will be happy to hear your thoughts

Leave a reply

Shopping cart