Kyocera FS3040MFP, FS3140MFP, FS3540MFP Fuser Replacement

 

Kyocera FS3040MFP, FS3140MFP, FS3540MFP Fuser Replacement

Below you will find the illustrated Kyocera FS3040MFP, FS3140MFP, FS3540MFP Fuser Replacement instructions. Also, you will find links to order in a replacement fuser if needed.

The service manual isn’t that helpful when determining the PM cylce of these parts. Some parts are rated at 300,000 while the manual states the initial PM setting is set to 100,000. Personally, I believe the fuser and feed rollers should be rated at 100,000 and given moderate to heavy usage, the developer, drum, and transfer roller should make it the 300,000 mark. Therefore I would leave the PM setting to 100,000 so the fuser and feed rollers are checked around this time.

Related part numbers : FK-350U, 302J193064, 302J193063, 302J193061, 2J193061, 302J193060

Related Fuser Errors
6000 Broken fuser heater lamp wire
6020 Abnormally high fuser thermistor 2 temperature
6030 Broken fuser thermistor 2 wire
6220 Abnormally high fuser thermistor 1 temperature
6230 Broken fuser thermistor 1 wire

 
302J193061 Kyocera-Mita FK-350 Fuser Unit (Kyocera-Mita 302J193061 Fuser) Part Number: FK-350, 302J193061, FK350, 302J193062 110-120 volt fusing assembly.
20&l=am2&o=1&a=B0137Q4Q62" alt="" width="1" height="1" border="0" / (1) Detaching and refitting the fuser unit Procedure 1. Draw the rear unit. 2. Insert a flat-blade screwdriver to push the fuser lock (gray colored) on the rear unit and the fuser unit is separated from the rear unit (rails). Do it both ends of the rear unit. Kyocera FS3040MFP, FS3140MFP, FS3540MFP Fuser Replacement

3. Check or replace the fuser unit and refit all the removed parts.
Place the fuser unit on the rear unit (rails) and push the fuser lock so that the fuser lock catches the fuser unit.
Do it for the both ends of the fuser unit.

NOTE:
When the periodic maintenance is performed then you should reset the maintenance counter :
U251 Clearing the maintenance count

 

We will be happy to hear your thoughts

Leave a reply

Shopping cart