Canon imageRUNNER 1750,1740,1730 E004-0000 Error Code

 

Canon imageRUNNER 1750,1740,1730 E004-0000 Error Code

The Canon imageRUNNER 1750,1740,1730 E004-0000 Error Code is a fuser thermistor disconnect error. On this page you will find what the service manual has to say along with a few other tips that might help you walk through this problem. Also, you will find links to purchase a new fuser followed by a link to the illustrated fuser replacement instructions.

Canon imageRUNNER 1750,1740,1730 E004-0000 Error Code

 

Service Manual Instructions for the Canon imageRUNNER 1750,1740,1730 E004-0000 Error Code

Problem : Thermistor disconnection detection error
Description : Connector disconnection was detected for 30 msec on end.
Possible Solutions :
1. Check the connector connection. (J206 on the DC Controller PCB, J101 on the Power Supply PCB)
2. Replace the Fixing Assembly.
Canon imageRUNNER 1750,1740,1730 Fuser Replacement
4. Replace the DC Controller PCB.


Additional Information on the Canon imageRUNNER 1750,1740,1730 E004-0000 Error Code

  1. You might want to try and do a fuser code reset but I’m not sure if it would work with this error. Canon imageRUNNER 1750,1740,1730 Service Mode / Fuser Code Reset
  2. Remove the fuser and check the connectors.
  3. Replace the fuser. Canon imageRUNNER 1730 Fuser Unit Removal and Replacement Procedure

    How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF.

    How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF. Canon imageRUNNER ADVANCE 400IF Fixing Assembly, compatible with: For ...

We will be happy to hear your thoughts

Leave a reply

Shopping cart