Canon imageRUNNER 1750,1740,1730 E003-0000 Error Code
The Canon imageRUNNER 1750,1740,1730 E003-0000 Error Code is a result of a lower than expected temperature reading in the fusing assembly by one of the thermistors. Below you will see what the service manual has to say on the subject along with links to reset the fuser error code and links to the fuser replacement instructions.
Service Manual Instructions for the Canon imageRUNNER 1750,1740,1730 E003-0000 Error Code
Note : Anytime the machine reports an Error related to the fuser, it will have to be reset in service mode. Therefore, don’t be surprised to be resetting the error multiple times when troubleshooting if the problem goes beyond Step 1.
Problem : Detection of fixing low temperature during printing
Description : The Main Thermistor detected a temperature lower than 80 deg C for 200 msec or longer on end, or the Sub Thermistor detected a temperature lower than 60 deg C for 200 msec or longer on end.
Possible Solutions :
1. Go through the following to clear the error: CLEAR > ENGIN >Â ERRCLR in Service Mode; then, turn OFF and then ON the power.
Canon imageRUNNER 1750,1740,1730 Service Mode / Fuser Code Reset
2. Check the connector connection. (J206 on the DC Controller PCB, J101 on the Power Supply PCB)
3. Replace the Fixing Assembly.
Canon imageRUNNER 1750,1740,1730 Fuser Replacement
4. Replace the DC Controller PCB.
Additional Information on the Canon imageRUNNER 1750,1740,1730 E003-0000 Error Code
- Reset the fuser error code. Canon imageRUNNER 1750,1740,1730 Service Mode / Fuser Code Reset
- Check the power source. Most manufactures recommend plugging the unit straight into a wall outlet. If you feel the need to use a surge protector then just use it for this device and do not plug multiple devices into it. Also, never plug these machines into a battery backup device.
- Lots of times errors like this can be a result of a sudden power outage so a simple code reset will fix the problem. If the problem comes back after the reset or in the next week or two then a week fuser would be suspect.
- Replace the fuser. Canon imageRUNNER 1730 Fuser Unit Removal and Replacement Procedure
How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF.
How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF. Canon imageRUNNER ADVANCE 400IF Fixing Assembly, compatible with: For ...
