Canon imageRUNNER 1750,1740,1730 E001-0001 Error Code
The Canon imageRUNNER 1750,1740,1730 E001-0001 Error Code happens with the fusing assembly thermistor reads an oveheat issue happening within the fusing assembly. Below you will find what the service manual has to say on the subject along with links to the fuser error code reset procedure. Also, you will find links to order in a replacement fuser, however the manual is reporting that this is more of a DC Controller issue, rather than the fusing assembly.
Note :Â Fuser Errors have to be reset in service mode. While testing the machine, each time the machine displays a fuser error you probably will have to go in a reset the message to further test.
Caution : Due to the nature of an overheat error, it is recommended that you allow the machine to sit 15 to 20 minutes before trying to restore the machine to working order. In other words, let the machine sit for a while before resetting. I haven’t seen it on Canon machines but I’ve seen heating elements melt on pressure rollers if they are reset to quickly.
Service Manual Advice for the Canon imageRUNNER 1750,1740,1730 E001-0001 Error Code
Problem:Â Â Detection of overheating of Fixing Assembly
Description : The hardware circuit detected overheating of the Main Thermistor or Sub Thermistor for 30 msec or longer.
Remedy 1. Go through the following to clear the error: CLEAR > ENGIN >
ERRCLR in Service Mode; then, turn OFF and then ON the power.
Canon imageRUNNER 1750,1740,1730 Service Mode / Fuser Code Reset
2. Replace the DC Controller PCB (PCB1).
How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF.
How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF. Canon imageRUNNER ADVANCE 400IF Fixing Assembly, compatible with: For ...
