Canon imageRUNNER 1750,1740,1730 E000-0000 Error Code

 

Canon imageRUNNER 1750,1740,1730 E000-0000 Error Code

The Canon imageRUNNER 1750,1740,1730 E000-0000 Error Code is related to the main thermistor reporting a overheat issue in the fusing assembly. Below you will find what the service manual has to say on the subject and few other tips that might help you resolve the problem before breaking down and buying a new fusing unit. Also, you will find links to reset the fuser error code and links to replace the fuser if needed.

Canon imageRUNNER 1750,1740,1730 E000-0000 Error Code

 

Note : Once the machine displays a fuser error you typically need to enter service mode to reset the message. Therefore when troubleshooting you might have to reset the fuser error multiple times going through the steps.

Service Manual Advice for the Canon imageRUNNER 1750,1740,1730 E000-0000 Error Code

Problem : Detection of overheating of Fixing Assembly
Description : The Main Thermistor detected 250 deg C or higher for 200 ms or longer on end.
Possible Solutions :
1. Go through the following to clear the error: CLEAR > ENGIN > ERRCLR in Service Mode; then, turn OFF and then ON the power.
Canon imageRUNNER 1750,1740,1730 Service Mode / Fuser Code Reset
2. Check the connector connection. (J206 on the DC Controller PCB, J101 on the Power Supply PCB)
3. Replace the Fixing Assembly.
Canon imageRUNNER 1750,1740,1730 Fuser Replacement
4. Replace the DC Controller PCB.

Additional Information on the Canon imageRUNNER 1750,1740,1730 E000-0000 Error Code

  1. Turn the machine off and let it sit 15 to 20 minutes then reset the error code. On overheat errors you do not want to rush in and reset the error until the fuser has cooled down a little bit.
  2. Check and make sure the machine has proper ventilation, not sitting in direct sun light, and that the room temperatures are acceptable.
  3. Make sure the fuser settings and the paper settings match the paper type your running through the machine.
  4. If you are running extremely large jobs or printing on heavy paper. Break the job up into smaller jobs and allow cooling between jobs.
  5. Replace the fuser.
  6. Canon imageRUNNER 1730 Fuser Unit Removal and Replacement Procedure

    How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF.

    How to change the Fixing Assembly for the imageRUNNER ADVANCE 400IF. Canon imageRUNNER ADVANCE 400IF Fixing Assembly, compatible with: For ...

We will be happy to hear your thoughts

Leave a reply

Shopping cart