HP Color LaserJet M552 and M553 Fuser Replacement

 

HP Color LaserJet M552 and M553 Fuser Replacement HP Color LaserJet M552 and M553 Fuser Replacement Procedure

The HP B5L35-67901 OEM – Fusing assembly is rated at around 150,000 prints. This might vary a little depending on the type of usage on the machine. Like most models made in the last 10 years the HP Color LaserJet M552 and M553 Fuser Replacement can be done by just about anybody. Below you will find the simple illustrated replacement instructions along with information on how to reset the life counter and links to purchase a replacement fuser if you haven’t already.

Anytime you are about ready to replace important parts of the machine it is recommended that you print off the configuration page and lots of times I like to print off the supply usage page to show the life of the counter before the replacement and afterwards. Also, since this is the fusing unit, you might want toallow 15 to 20 minutes of cooling before you perform this repair. If you do not wait, then be prepared to deal with a little heat will replacing.

Turn the machine off and I often recommend unplugging the machine before performing the below maintenance.

Step 1: HP Color LaserJet M552 and M553 Fuser Replacement
1.
Open the right door.

HP Laserjet Series M552, M553, M577 right door open

 

2. Grasp the two fuser handles, and then squeeze the two blue triggers on the handles to release the fuser.

HP Laserjet Series M552, M553, M577 fuser removal

 

3. Slide the fuser straight out of the printer to remove it.

HP Laserjet Series M552, M553, M577 fuser replacement

 

Step 2: Unpack the replacement fuser B5L35-67901

Step 3: Install the fuser
1. Align the fuser with the opening in the printer.

HP Laserjet Series M552, M553, M577 fuser installation

 

2. Slide the fuser into the printer, push in to install it, and then make sure that it is fully seated.

HP Laserjet Series M552, M553, M577 fuser install
TIP: When the fuser is fully seated, the two blue triggers on the handles make an audible click.
3. Close the right door.

HP Color LaserJet M552 and M553 Fuser Life Counter Reset
1. From the Home screen on the control panel, scroll to and touch the Administration button.
2. Open the following menus:
● Manage Supplies
● Reset Supplies
● New Maintenance Kit
3. Select the Reset item to reset the supplies counter.

[wwcAmzAffProducts asin=”B00JPNBING”][/wwcAmzAffProducts]

We will be happy to hear your thoughts

Leave a reply

Shopping cart