Brother Color HL- 3040CN / 3070CW Fuser Replacement

 

Instructions for the Brother Color HL- 3040CN / 3070CW Fuser Replacement

After 50,000 prints your machine will come up and give you a Replace Fuser Message. At this time I strongly recommend that a new fusing assembly is purchased and installed in the machine. Failure to replace the fusing assembly at this time can lead to a decline in the print quality of the machine. Below you will find the illustrated  Brother Color HL- 3040CN / 3070CW Fuser Replacement procedure. Also, you will find a few links to order in a replacement fusing assembly if you haven’t already order one. Finally, at the bottom of the article you will find a link to the Fuser Life Reset counter to clear the Replace Fuser message once a new one has been installed.

Brother Part# LU5796001 Fuser Fixing Unit (OEM)

Brother Color HL- 3040CN / 3070CW Fuser Replacement Procedure

1. Open the Back Cover

2. Release the Hook and remove the Left and Right Back Cover Stopper from the Main Body.

Brother HL - 3040CN  3070CW back cover removal 1

3. Remove the Bush of the Back Cover from the Shaft at the right side of the Main Body.

Brother HL - 3040CN  3070CW back cover removal 2

4. Remove the Back Cover from the Shaft at the left of the Main Body.

Brother HL - 3040CN  3070CW back cover removal 3

5. Release the Left and Right Fuser Cover Lock Lever and open the Fuser Cover.

Brother HL - 3040CN  3070CW fuser cover removal

6. Take out the Shaft at the left side of the Fuser Cover from the Notch on the Bush of the Left Side Frame.

7. Take out the Shaft at the right side of the Fuser Cover from the Bush of the LVPS cover, and remove the Fuser Cover.

Brother HL - 3040CN  3070CW fuser cover removal 2

8. Remove the 1 Screw and the remove the Left Fuser cover from the fuser unit.

Brother HL - 3040CN  3070CW left fuser cover removal

9. Remove the 1 Screw and then remove the Right Fuser cover from the fuser unit.

Brother HL - 3040CN  3070CW right fuser cover removal

10. Disconnect the two DC connectors from the Front Eject Sensor Board.

Brother HL - 3040CN  3070CW DC connector removal

11. Disconnect the two AC terminals from the fuser unit.

Brother HL - 3040CN  3070CW AC connector removal

12. Remove the 2 Screws on either side of the fuser unit and remove the fuser from the Main Body.

Brother HL - 3040CN  3070CW Fuser Replacement

Installation Note :  The fuser is shipped with a spacer installed to keep the hot roller from deforming the pressure roller. Once you have the fuser installed in the machine, make sure that you remove the spacer.

Brother HL - 3040CN  3070CW Fuser installation note

Click on the link below for the Fuser Life Counter Reset Procedure

—  Brother HL – 3040CN / 3070CW Replace Fuser Message and Reset  —

Brother HLL8350CDW Wireless Color Laser Printer, Amazon Dash Replenishment Ready

Price: $798.78

18 used & new available from $399.99

HP Laserjet Enterprise 500 Color M551dn, (CF082A)

Price: $1,744.99

9 used & new available from $449.99

We will be happy to hear your thoughts

Leave a reply

Shopping cart