Lexmark T654, T652, T650 Error Code 920.01 Fuser Issues

 

Diagnostic Aids for the  Lexmark T654, T652, T650 Error Code 920.01

The  Lexmark T654, T652, T650 Error Code 920.01 message means that the fusing assembly took to long to get heated up from standby mode to the new enhanced mode. Yeah, just like HP machines these machines are starting to get oddly specific in their error codes. Anyway, below find a few repair tips to help solve this problem. Also, you will find links to purchase a new fusing assembly and at the bottom of the page find a link to the fuser replacement instructions.

Lexmark T654, T652, T650 Error Code 920.01
Service Manual Advice for the  Lexmark T654, T652, T650 Error Code 920.01

Warning the fusers can be very hot, use caution when handling and it is recommended that the power cord be unplugged if you plan or removing or replacing.

1. Turn the machine off/on  and ensure the fuser unit  assembly is properly  installed.
2. Ensure the proper voltage  fuser is installed in the  machine.
3. Replace the fuser unit  assembly if problem  remains.

40X4418-FRN -N Lexmark Fuser T650 T652 T654 X65X Factory Rebuilt With All Oem Parts T650 X652

Other Repair Tips for the  Lexmark T654, T652, T650 Error Code 920.01

1. Check the power source. Make sure the machine is plugged straight into a wall outlet. No power strips or battery back ups.
2. Make sure you are operating the machine in the correct environment. Personally, I don’t recommend anything lower than 50 decrees. If the machine has sat outside and is cold let it sit 2 to 3 hours to adjust to room temperature before using.
3. Remove the fusing assembly and clean the thermistors.
4. Replace the fusing assembly.

Click on the link below for the fuser replacement instructions

Lexmark T654, T652, T650 Fuser Assembly Replacement – 40X4418

We will be happy to hear your thoughts

Leave a reply

Shopping cart