Kyocera FS2000, FS3900, FS4000 Feed Roller Replacement

 

Instructions for the Kyocera FS2000, FS3900, FS4000 Feed Roller Replacement

These machines are moving on up in the Kyocera line of monochrome printers. These come with a 500 sheet cassette tray. They also print quicker and have higher duty cycles. While I like the smaller machines if a customer was to ask me, I would go for one of these machines. Another nice feature is the fact that they have control panels with displays which makes it easier on us techs when we have to go out and troubleshoot and for end users to understand and possibly fix problems without the need for a service call.

Below you will find the Feed assembly as one unit and the separation roller for the tray just below it. If you want to save money and order the two rollers in the feed roller assembly separate, you can find them listed at the end of the article.



Overtime you are going to run into feed problems. These machines are meant for heavy usage so they will rack up some high page counts in a shorter time than personal models. Therefore, you will have paper jam and feed problems when the feed rollers get worn out and need replaced. If you find that the paper is having problems getting out of the paper tray or just barely making it into the machine then you will want to consider the  Kyocera FS2000, FS3900, FS4000 Feed Roller Replacement.

Kyocera FS2000, FS3900, FS4000 Feed Roller Replacement Procedure

Note : These machines are slightly different from one model to the next so the pictures and steps might not be exact for your machine but they are pretty darn close. Also, these service manuals don’t  show breaking the feed roller assembly apart but it can be done. Therefore you will see pricing for the whole assembly in one piece or the individual rollers. It is a little cheaper to do the rollers separate but is less time consuming if you just replace the whole assembly.

1. Remove the paper cassette.
2. While pushing the lock and then slide the  paper feed roller pin.
3. While pressing the lever and then remove  the paper feed roller assembly.

Kyocera FS2000, FS3900, FS4000 Feed Roller Replacement
4. Check or replace the paper feed assembly  and refit all the removed parts.

Kyocera FS2000, FS3900, FS4000 Separation Roller  Replacement Procedure
1. Remove the paper cassette.
2. Push the bottom plate down until it locks
3. Unlatch the two latches and then remove  the separation  guide.

Kyocera FS2000, FS3900, FS4000 separation holder removal
4. Remove the separation  holder (roller) from the  separation  guide.

Kyocera FS2000, FS3900, FS4000 separation roller removal
5. Check or replace the separation  roller and refit all  the removed parts.

Below is the two rollers found in the feed roller assembly – It is cheaper to buy them this way but results in more work



KYOCERA FS 1028 1128 1035 1135 2000 wymiana rolek pobierania

Wymiana rolek w KYOCERA-MITA FS1028MFP FS1035MFP FS1128MFP FS1135MFP FS2000D FS2020D FS2100DN FS3900DN FS3920DN FS4000DN FS4020DN FS4100DN FS4200DN FS4300DN FSC5100DN FSC5200DN FSC5300DN TASKalfa...

We will be happy to hear your thoughts

Leave a reply

Shopping cart