Aug 132014
 
 

Canon imageCLASS MF6580, MF6570, MF6560, MF6550, MF6540, and  MF6530 Error Code List

I think this Canon MF6580 – through – MF6530 Error Codes List  explains itself. The bold print is the Error code displayed on the control with a brief description. The print in italic gives a little bit more detail in exactly what happened. After the italic print is a few troubleshooting tips and what items to check and/or replace. Obviously troubleshooting errors is not always an exact science. Sometimes errors are related to other issues. The point of the list is just to provide what the error means and points of interest. It is not a guarantee to fix your problem.

Canon MF6580 - through - MF6530 Error Codes List

 

E000
0000 Startup error

– The temperature detected by the main or sub thermistor does  not rise to the specified value during startup control.
– Check the fixing film connector.
– Replace the fixing film unit.
– Replace the DC controller PCB

E001
0000 Abnormally high temperature (detected by main thermistor)

–  The main thermistor detected an abnormally high temperature  (235 deg C) during temperature control.
– Check the connector of the fixing film unit.
– Replace the fixing film unit.
– Replace the DC controller PCB.

0001 Abnormally high temperature (detected by sub thermistor)
–  The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control.
– Check the connector of the fixing film unit.
– Replace the fixing film unit.
– Replace the DC controller PCB.

E00
0000 Low temperature during temperature control.

–  The target temperature is not reached during temperature control.
– Check the connector of the fixing film unit.
– Replace the fixing film unit.
– Replace the DC controller PCB.

E003
0000 Abnormally low temperature (detected by main thermistor)
After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
– Check the connector of the fixing film unit.
– Replace the fixing film unit.
– Replace the DC controller PCB.

0001 Abnormally low temperature (detected by sub thermistor)
– After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
– Check the connector of the fixing film unit.
– Replace the fixing film unit.
– Replace the DC controller PCB.

E010
0000 Main motor failure

The main motor is faulty.
– Check the connector of the main motor.
– Replace the main motor.
– Replace the DC controller PCB.

E100
0000 BD detection PCB failure

The BD detection PCB is faulty.
– Check the connector of the BD detection PCB.
– Replace the laser scanner unit.
– Replace the DC controller PCB.

E196
0001 Flash ROM write/read error
– Replace the image processor PCB.
The write/read of Flash ROM in the image processor PCB is faulty.

0002 PCL ROM write/read error
– Replace the PCL PCB.
The write/read of PCL ROM in the image processor PCB is faulty- Replace the image processor PCB.

E197
0000 Printer engine communication error  Erroneous
– communication between the DC controller PCB and image processor PCB was detected.
– Check the connectors of the DC controller PCB and image processor PCB.
– Replace the DC controller PCB for normal connection.
– Replace the image processor PCB.

E716
0000 Erroneous communication with optional cassette
– Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.
– Check the connectors of the optional cassette PCB and DC controller PCB.
– Replace the optional cassette PCB for normal connection.
– Replace the DC controller PCB.

E730
0000 inside error of the image processor PCB (PDL system error)
– The inside of the image processor PCB is faulty.
– Replace the image processor PCB.

E733
0000 Erroneous communication between controller and printer

– Cannot communicate with the printer at startup.
– Check the connectors of the DC controller PCB and image processor PCB for normal connection.
– Check the power supply of the printer (Check whether initialization is performed at startup).
– Replace the DC controller PCB or image processor PCB.

E736
0000 CCU communication error
– The installed modem PCB is incompatible.
– Check the connectors of the image processor PCB and modem.
– Replace the modem PCB.
– Replace the image processor PCB

E739
0000 Erroneous communication between controller and network board
– The installed network board is incompatible.
– Check the connectors of the image processor PCB and LAN PCB for normal connection.
– Replace the LAN PCB.
– Replace the image processor PCB.

E805
0000 Fan failure
– The fan is faulty.
– Check the fan connector.
– Replace the fan.
– Replace the DC controller PCB.

E808
0000 Fixing drive circuit failure
– The heater does not turn on.
– A fixing drive motor failure was detected.
– Check the connector of the fixing film unit.
– Replace the fixing film unit.
– Replace the fixing drive motor.
– Replace the DC controller PCB.
– Replace the power supply PCB.

0104 Pickup Delay Jam SR11
– After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time.

0208 Pickup Stationary Jam SR11
– After the registration sensor (SR11) has detected the leading edge of paper, the registration sensor (SR11) does not detect the trailing edge of paper within a specific period of time.

010c Delivery Sensor Delay Jam SR5
– After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time

0210 Delivery Sensor Stationary Jam SR5
– The delivery sensor cannot detect absence of paper within the specified time after turning off of
the registration clutch.
– The delivery sensor cannot detect absence of paper within the specified time after the sensor
detected the leading edge of paper

0214 Stationary jam in machine SR5, SR9
– After the registration sensor (SR11) has detected the trailing edge of paper, the delivery sensor (SR5) does not detect the trailing edge of paper within a specific period of time

021c Wound Paper Jam at Fuser SR5, SR11
– The delivery sensor (SR5) has detected absence of paper within the prescribed time after it detected
presence of paper

1118 Door open jam SR5, SR9, SR11, SW2
– The door was opened when there was printing paper in the transport path.

0000 Unknown jam – Other errors

0007 Initial stationary SR2002, SR2003, SR2004
– Paper is detected in the transport path before the ADF starts initial operation

0008 Document edge sensor delay jam SR2002
– The document edge sensor does not detect paper when the paper has been fed by the predetermined distance since reception of a pickup request.

0009 Document edge sensor stationary jam SR2002
– The trailing edge of paper is not detected when the paper has been fed by the predetermined distance since detection of it by the document edge sensor.

000a Paper absence (Pull out the document.)SR2001
– The Document set sensor has been held off since start of pickup.

000c Delivery delay jam SR2002
– In case the internal software signal “Delivery Sensor OFF” set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after the paper’s trailing edge is detected

000d Delivery stationary jam SR2002
-In case the internal software signal “Delivery Sensor ON” set in the system cannot be detected, when the paper feed request is received and the paper is fed the prescribed distance, and the leading edge of paper is detected and paper is fed the prescribed distance .

0010 Pickup NG SR2003
– The registration sensor has been held off since paper pickup started

 

 

 Posted by at 9:07 pm  Tagged with: