Replacement and Reset Instructions for the Replace Maintenance KitMessage on the Xerox Phaser 4500
After 200,000 prints the Xerox Phaser 4500 printer will display Replace Maintenance Kit. At this time a replacement kit should be ordered to help maintain proper paper feed and print quality. Failure to do so could result in unwanted repair cost and down time of your product. Below, in this article, are illustrated instruction on replacing the kit parts along with instructions on how to reset the PM counter after the kit has been installed.
XEROX Phaser 4500 maintenance kit, 108R00600
Replace Maintenance Kit Message Reset Procedure
This procedure restarts the counter that tracks Fuser life. Perform this procedure after you install a new Maintenance Kit.
To reset the fuser:
1. From the Main Menu, select Information, then press the OK button.
2. Select Supplies Info, then press the OK button.
3. Select Reset Fuser Life, then press the OK button.
4. Select Reset Fuser Life NOW, then press the OK button to reset the fuser life.
Service Manual’s Advice for the Replace Maintenance Kit Message.
1. Install a new fuser assembly.
2. Reset the Fuser Life (“Resetting Fuser Lifeâ€).
3. If installing a new fuser and following the reset procedure does not resolve the problem then replacement of the HVPS/engine logic board is the next step.
Xerox 108R00600 Phaser 4500 Maintenance Kit in Retail Packaging
Price: $189.62
1 used & new available from $189.62