Brother MFC 8480DN, 8890DW Replace Fuser Message and Reset
Replace Fuser Message and Reset – Brother MFC 8480DN, 8890DW
I’ve seen in my statics page a lot of people looking for the replace fuser message instructions for the Brother MFC 8480DN, 8890DW and DCP 8085 and how to reset it, Brother LU7939001 Fuser Assembly 8080DN 8480DN 8890DW 
The replace fuser message comes up when the machine has reached 100,000 copies or prints. The good thing is the machine doesn’t actually stop working but the message can get annoying like the change drum soon message when you go up to use the machine and your constantly confronted with the replace fuser message. Most people want the quick fix and just want to reset the replace fuser message. Unfortunately, that is not how to properly handle the message. Once the replace fuser message is displayed on the control panel the fusing assembly needs to be replaced. Every Brother machine I’ve serviced for this error the fusing unit was worn out or already having print quality issues as a result of the fusing unit rollers breaking down. So I strongly recommend not ignoring the message and ordering in a fuser unit for replacement.
Fuser Removal for the Brother MFC 8480, 8890 and DCP 8085
Alright after fighting with PDF images I finally was able to put some illustrations in this. Im not putting all them in but it should be enough to get you started and walk you through it. Click on the pictures for blown up views.
Back Cover
1. Open Back Cover.
2. Remove the arm of the back cover from the pin.
3. Remove the pins of the outer chute assembly from the back cover.
4. Remove the back cover.
Rear Chute Assembly
1. Hold the knobs on the rear chute assembly and pull down this to your side.
2. Remove the arms of the rear chute assembly from the pins.
3. Remove the rear chute assembly.
Fuser Unit
1. On the left side is 1 screw on the top left corner. Remove the screw and remove the black plastic cover. Should just pull out and right.
2. Disconnect the connector of the heater terminal while pressing the hook of the connector of the fuser.
3. Pull the right fuser unit harness cover (black plastic piece keeping the thermistor cables secure on the right side of the machine) left while pressing the hook and pull out the fuser unit harness cover towards the back.
4. Disconnect the connectors of the Thermistor assembly M and Thermistor assembly S from the Relay rear PCB assembly, and remove the harnesses of these thermistors.
5. Remove the 1 screw and then remove the Fuser Unit, Brother LU7939001 Fuser Assembly 8080DN 8480DN 8890DW
Reassemble Instructions
Assembling Note: To prevent the deformation of the pressure roller, the fusing unit spare part is shipped with its pressure roller at low nip pressure. Before installing the fusing unit, turn back the levers to the normal position.
1. Put the fuser unit on a flat, horizontal surface. Pull up each of the black tabs on the right side and left side.
2. Make sure that the black lever is in the position.
Reset Procedure for the replace fuser message in the Brother MFC 8480, 8890 and DCP 8085
Here is the part probably everybody is waiting for because who cares about actually changing out the fusing unit. Like I said above in this article, the replace fuser message is displayed when the page count has reached 100,000 prints. Most people figure out a way to clear the replace fuser message to be confronted with two more messages. Replace Laser Unit and Replace PF Kit. Again, Brother recommends replacing the laser unit and the cassette feed tires after 100,000 copies. I agree with the PF kit but disagree with the laser unit. Laser units tend to last well past 100,00 prints. Usually when the laser unit starts to wear it will get noisy. Kinda sounds like a motor or a fan going out or the machine will get louder when the machine starts to print. Anyway to reset the replace fuser message and others you just need to press the 3 and 9 buttons at the same time. After you press the buttons together the display will show the life counters. Now you just need to scroll down to the part you want to reset and follow the instructions.
Conclusion about the Replace Fuser Message
I put the fuser replacement procedure in this article for two reasons. One to show you how to do it and the other to make it easier for techs and end users to make the right decision and replace the fusing assembly when the replace fuser message is displayed. Hopefully the instructions above and my advice has helped you work through the replace fuser message on the Brother MFC 8480, 8890, and DCP 8085 multifunction machines and has allowed you to reset the replace fuser message and get your machine working properly again.
Brother LU7939001 Fuser Assembly 8080DN 8480DN 8890DW
Muchas gracias hermano por tu aporte ya habia cambiado el cilindro de teflon y el de silicon, solo me faltaba borrar el mensaje, Gracias un saludo
Plus, making himself more flexible, defensively, might help his overall value moving forward.
, Ramon Sessions, Kyle O’Quinn, Doug McDermott, and Kristaps Porzingis.
Most intriguing, though, may be White’s batting eye and pitch recognition.
Defensive end Harold Landry has been a dominant force for the Eagles’ defense.
After a second field goal by Tyler Durbin, Malik Hooker returned an interception for a 26-yard touchdown with 3:02 left in the first half.
Holliday never recovered fully from it and he lost so much ground on the Yankees roster.Throughout the season, 20% of the Bulls’ shots have come with a defender within two feet., rolling the dice that the extra work in college would improve his overall play.
[url=http://www.watsun.com.pk/sell.asp?p_id=adidas-bounce-running-shoes]adidas bounce running shoes[/url]
[url=http://www.watsun.com.pk/sell.asp?p_id=adidas-samba]adidas samba[/url]
When Nicklas Backstrom missed the first couple games to recuperate from offseason hip surgery, “Kuzy” (as fans affectionately call him) stepped up to fill the void.For the third straight week, the Big Ten conference received five teams in the Top 25.
Outside shooting could be a big issue for the Thunder this season, and New York likely went into the game looking to exploit that.
co regresses from his phenomenal final two months of the season, then the twins will want a backup infielder.By most accounts, he should have performed a lot better than he has the past two seasons.About Latest Posts Charlie GillmerCharlie Gillmer is a lifelong Twins fan who spends most nights dreaming of learning a knuckleball and pitching them to a World Series victory.
[url=http://www.saade-agricole.com/web/news.asp?p_id=cheap-nike-free]cheap nike free[/url]
[url=http://www.saade-agricole.com/web/news.asp?p_id=stussy-nike-blazer-mens-usa]stussy nike blazer mens usa[/url]
nd ignored the consensus 12/5 upset en route to forgetting to pick a 12 entirely.I had the pleasure of interviewing coach Fitzpatrick and he talked Major League Rugby, the Strikers’ combine, and rugby in Houston.
on for the Sox, it still looks like Moncada will most likely start the season in the minors at Triple-A Charlotte.
Cy was a three-year letterman at Twin Falls High School in Idaho, and in 2011, he was drafted by the Texas Rangers in the 35th round.However, injury would get in the way of those plans.Tickets, PleaseWith temperatures nearing 100 humid degrees, the Grizzlies were already working out on the field when gates opened at 5:30.
[url=http://www.alliedhealthsciences.com/news.php?p_id=nike-air-more-uptempo-original-release]nike air more uptempo original release[/url]
[url=http://www.alliedhealthsciences.com/news.php?p_id=replica-kd-backpack]replica kd backpack[/url]
To make matters worse, Kaser was directly responsible for an even more noticeable mistake against the Raiders.Major League Rugby competition, it is looking more and more likely that the PRO12 will act on the rumours of expansion into North America.
However, he has played over 150 games every season since being signed to the Mets and his defense is still above average.
At??6’5″ and 215 lbs, he’s got a power arm with excellent control.When looking at his first half of the season, one could argue Zaza Pachulia deserves the nod for his first All-Star game.de our opening day 25,” GM Jeff Luhnow said, in response to the players’ options.
[url=http://www.alliedhealthsciences.com/news.php?p_id=nike-cr7-sneakers]nike cr7 sneakers[/url]
[url=http://www.alliedhealthsciences.com/news.php?p_id=2010-air-max-mens]2010 air max mens[/url]
Israel Dagg and the Crusaders’ back line are phenomenal and will take a great deal of work by the Lions to shut them down.ces (actually scratch that, it’s exactly where you go for stuff like this), where the tinfoil hats were out in full bloom.
The first game for one-time Cubs manager and now Sox skipper, Rick Renteria, at Wrigley as manager of the White Sox.
While it is not evident to most for the drop-off in production in the 2nd half, one thing that was p.Measurements: 6’10, 196 pounds, 7’3 wingspan.With this deal, Oakland is creating an unnecessary logjam, but who knows, it’s baseball.
[url=http://www.sure2inbox.com/home.asp?p_id=adidas-originals-superstar-primeknit-cheap]adidas originals superstar primeknit cheap[/url]
[url=http://rpnes2015.medical-congresses.ro/home.asp?p_id=adidas-dragon-beige]adidas dragon beige[/url]
Tillman sat out his second straight contest with a knee injury and now may reportedly be out for several more weeks.Courtney Upshaw started things off by shoving Shaq Lawson back with so much force that he knocked down Brady for a sack.
Even though they are the defending champions and reached two straight World Series, the Kansas City Royals can?€?t stay at the top forever.
Earlier in the season, I wrote about how the Cleveland Cavaliers were considerably better when LeBron James shot less than 20 times.In order to make a splash on what has been a very interesting free agency period for the Bulls, their last big move was to add former Miami Heat star, Dwyane Wade.Here at The Runner Sports, we pride ourselves on examining the farm systems of MLB teams and bringing you the profiles of the stars of the future.
[url=http://www.goldentriangleindiapackages.com/shop.asp?p_id=fernando-torres-jersey]fernando torres jersey[/url]
[url=http://www.irockolas.com/sell.asp?p_id=nike-shoes]nike shoes[/url]
Toronto regularly scores goals where pucks hit off Capitals players and make it into the net or drop near the crease for tap-ins.Of course, a lot can happen, and you can’t count out Maryland just yet either.
They had so much success early in the season when they were drawing a lot of walks.